Low Profile Neuro System
The Low Profile Neuro System offers a complete line of plates, screws, meshes, and instruments designed to close bone flaps quickly, enabling stable internal fixation and addressing especially neurosurgical problems with the lowest plate/screw profile of any self-drilling product available on the market. The Low Profile Neuro System includes all plates and meshes currently available in the cranial System 1.3 and 1.5 as well as the new Ti Low Profile Neuro Strut Plates and the new Ti Low Profile Neuro Adaption Plates. The Low Profile Neuro System offers new Ti Low Profile Neuro Self-Drilling Cranial Screws with greater strength and an improved cruciform drive system that delivers superior blade/screw retention and off-axis stability.
Low Profile Neuro Plates
The Low Profile Neuro System is designed to close bone flaps quickly, enable stable internal fixation, and address particular neurosurgical problems with a very low plate/screw profile. Three new plates widen the existing system.
Adjustable Strut Plate
The Adjustable Strut Plate is an 8-hole plate providing multiple points of fixation for a craniotomy bone flap. These bone flaps are variable in size and shape, and the plates offer the ability to be readily contoured in-plane to adapt to a wide variety of curvatures. They are offered in two sizes: 1.3 mm and 1.6 mm.
5-Lobe Burr Hole Cover
The Five-Lobe Burr Hole Covers are adaptations of the current (6-lobe) burr hole covers. In cases where a catheter, shunt, or drain must protrude through the skull, these plates provide an opening for passage while still securing the bone flap in place. They are offered in three sizes; 1.3 mm, 1.5 mm, and 1.6 mm.
The Temporal Mesh is designed for a neurosurgical access procedure where a keyhole shaped perforation is made in the temporal region of the skull. This perforation is performed with a rotary burr which leaves no bone flap to be repositioned after surgery. The preshaped mesh covers the bony defect and prevents temporal hollowing. The Temporal Mesh is offered in two sizes; 1.3 mm and 1.6 mm.
Low Profile Neuro Contourable Mesh, Malleable Mastoid, medium
The Low Profile Neuro System has been enhanced by a medium sized mesh for the mastoid. This mesh is a triangular shaped piece of contourable mesh with ears allowing fixation in the mastoid region of the skull. Due to the contours found in the mastoid area, this malleable, triangular shape is advantageous for procedures where the bone is osteotomized. It can also be used as a crib to assist in reconstruction of the mastoid area using bone substitutes.
Optimizing Surgical Cranial Access
Hazards and labeling
Due to varying countries’ legal and regulatory approval requirements, consult the appropriate local product labeling for approved intended use of the products described on this website. All devices on this website are approved by the AO Technical Commission. For logistical reasons, these devices may not be available in all countries worldwide at the date of publication.
This work was produced by AO Foundation, Switzerland. All rights reserved by AO Foundation. This publication, including all parts thereof, is legally protected by copyright.
Any use, exploitation or commercialization outside the narrow limits set forth by copyright legislation and the restrictions on use laid out below, without the publisher‘s consent, is illegal and liable to prosecution. This applies in particular to photostat reproduction, copying, scanning or duplication of any kind, translation, preparation of microfilms, electronic data processing, and storage such as making this publication available on Intranet or Internet.
Some of the products, names, instruments, treatments, logos, designs, etc referred to in this publication are also protected by patents, trademarks or by other intellectual property protection laws (eg, “AO” and the AO logo are subject to trademark applications/registrations) even though specific reference to this fact is not always made in the text. Therefore, the appearance of a name, instrument, etc without designation as proprietary is not to be construed as a representation by the publisher that it is in the public domain.
Restrictions on use: The rightful owner of an authorized copy of this work may use it for educational and research purposes only. Single images or illustrations may be copied for research or educational purposes only. The images or illustrations may not be altered in any way and need to carry the following statement of origin “Copyright by AO Foundation, Switzerland”.
Check www.aofoundation.org/disclaimer for more information.
If you have any comments or questions on the articles or the new devices, please do not hesitate to contact us.
"approved by AO Technical Commission" and "approved by AO Foundation"
The brands and labels "approved by AO Technical Commission" and "approved by AO Foundation", particularly "AO" and the AO logo, are AO Foundation's intellectual property and subject to trademark applications and registrations, respectively. The use of these brands and labels is regulated by licensing agreements between AO Foundation and the producers of innovation products obliged to use such labels to declare the products as AO Technical Commission or AO Foundation approved solutions. Any unauthorized or inadequate use of these trademarks may be subject to legal action.