Basic Trocar System
The new Basic Trocar System was developed in response to a request for a more simplified set of trocars. Clinical feedback from many surgeons had shown that the already existing Universal Trocar System with its high number of components can be too overloaded for their needs in the OR.
The simplified Basic Trocar System was created by eliminating cannulae and drill guides from the existing system, and also by consolidating the functionality of three retractors (Malleable C-Retractor, Cheek Retractor Blade, and Cheek Retractor Ring) into one new instrument (Cheek Retractor Forceps). In addition to reducing the amount of instruments, a selection of new features has been included.
Snap Lock Feature
The Basic Trocar Systems drill guides and obturator fit into the cannily using a snap lock feature. This feature prevents unintentional decoupling of the instruments from the cannula, therefore preventing the instruments from dropping.
To remove a drill guide or obturator from the cannula, the instruments head should be compressed with thumb and forefinger and then extracted.
Rotating Trocar Handle
The Basic Trocar Handle can rotate around the cannula to allow for more space at the operating site. To maintain control over the instrument, the handle engages like a ratchet in discrete arcs instead of freely rotating.
Cheek Retractor Forceps
The new Cheek Retractor Forceps allow the surgeon to retract buccal tissue quickly and easily. The forceps combine the functionality of the former Malleable C-, Blade- and Ring-Retractors. The recommendation of several surgeons, the forceps incorporate the same width and angles as the existing Cheek Retractor Blade. The forceps can be disassembled into two pieces, to allow for easy cleaning and sterilization. The forceps interlock is asymmetrical, so it cannot be assembled incorrectly.
To prevent slippage, the threads on the inner surface of the forceps jaw affix it to the cannulas shaft very tightly.
The Basic Trocar Set includes three drill bits. Each has a shaft diameter of 2.4 mm, a 30 mm fluted length, and markings indicating drill size and hole depth. The commonality of their diameters and lengths enables all three drill bits to be used with any of the basic drill guides.
Hazards and labeling
Due to varying countries’ legal and regulatory approval requirements, consult the appropriate local product labeling for approved intended use of the products described on this website. All devices on this website are approved by the AO Technical Commission. For logistical reasons, these devices may not be available in all countries worldwide at the date of publication.
This work was produced by AO Foundation, Switzerland. All rights reserved by AO Foundation. This publication, including all parts thereof, is legally protected by copyright.
Any use, exploitation or commercialization outside the narrow limits set forth by copyright legislation and the restrictions on use laid out below, without the publisher‘s consent, is illegal and liable to prosecution. This applies in particular to photostat reproduction, copying, scanning or duplication of any kind, translation, preparation of microfilms, electronic data processing, and storage such as making this publication available on Intranet or Internet.
Some of the products, names, instruments, treatments, logos, designs, etc referred to in this publication are also protected by patents, trademarks or by other intellectual property protection laws (eg, “AO” and the AO logo are subject to trademark applications/registrations) even though specific reference to this fact is not always made in the text. Therefore, the appearance of a name, instrument, etc without designation as proprietary is not to be construed as a representation by the publisher that it is in the public domain.
Restrictions on use: The rightful owner of an authorized copy of this work may use it for educational and research purposes only. Single images or illustrations may be copied for research or educational purposes only. The images or illustrations may not be altered in any way and need to carry the following statement of origin “Copyright by AO Foundation, Switzerland”.
Check www.aofoundation.org/disclaimer for more information.
If you have any comments or questions on the articles or the new devices, please do not hesitate to contact us.
"approved by AO Technical Commission" and "approved by AO Foundation"
The brands and labels "approved by AO Technical Commission" and "approved by AO Foundation", particularly "AO" and the AO logo, are AO Foundation's intellectual property and subject to trademark applications and registrations, respectively. The use of these brands and labels is regulated by licensing agreements between AO Foundation and the producers of innovation products obliged to use such labels to declare the products as AO Technical Commission or AO Foundation approved solutions. Any unauthorized or inadequate use of these trademarks may be subject to legal action.