LCP Distal Medial Tibia
The LCP Distal Medial Tibia has been developed for fractures in the metaphyseal area that may reach into the shaft. The distal end is anatomically contoured to the distal medial tibia, with a light twist to fit the bone. The plate is easy to contour to take the peculiarities of the metaphyseal area into account. The first four threaded screw holes in the distal section are angled to allow optimal fixation of the screws in the epiphyseal area without penetrating the joint. The dense net of 3.5 LCP combination holes in the thinned plate area allows the insertion of more screws to provide a higher anchoring stability. The long hole helps to fine-tune the reduction in the longitudinal axis. The LCP Distal Medial Tibia 3.5/4.5/5.0 is available in a left and right version with twelve different lengths from 420 holes.
The LCP Distal Medial Tibia is available in titanium and stainless steel.
A specially adapted Guiding Block allows easy and correct insertion of the drill sleeves into the distal plate area.
Hazards and labeling
Due to varying countries’ legal and regulatory approval requirements, consult the appropriate local product labeling for approved intended use of the products described on this website. All devices on this website are approved by the AO Technical Commission. For logistical reasons, these devices may not be available in all countries worldwide at the date of publication.
This work was produced by AO Foundation, Switzerland. All rights reserved by AO Foundation. This publication, including all parts thereof, is legally protected by copyright.
Any use, exploitation or commercialization outside the narrow limits set forth by copyright legislation and the restrictions on use laid out below, without the publisher‘s consent, is illegal and liable to prosecution. This applies in particular to photostat reproduction, copying, scanning or duplication of any kind, translation, preparation of microfilms, electronic data processing, and storage such as making this publication available on Intranet or Internet.
Some of the products, names, instruments, treatments, logos, designs, etc referred to in this publication are also protected by patents, trademarks or by other intellectual property protection laws (eg, “AO” and the AO logo are subject to trademark applications/registrations) even though specific reference to this fact is not always made in the text. Therefore, the appearance of a name, instrument, etc without designation as proprietary is not to be construed as a representation by the publisher that it is in the public domain.
Restrictions on use: The rightful owner of an authorized copy of this work may use it for educational and research purposes only. Single images or illustrations may be copied for research or educational purposes only. The images or illustrations may not be altered in any way and need to carry the following statement of origin “Copyright by AO Foundation, Switzerland”.
Check www.aofoundation.org/disclaimer for more information.
If you have any comments or questions on the articles or the new devices, please do not hesitate to contact us.
"approved by AO Technical Commission" and "approved by AO Foundation"
The brands and labels "approved by AO Technical Commission" and "approved by AO Foundation", particularly "AO" and the AO logo, are AO Foundation's intellectual property and subject to trademark applications and registrations, respectively. The use of these brands and labels is regulated by licensing agreements between AO Foundation and the producers of innovation products obliged to use such labels to declare the products as AO Technical Commission or AO Foundation approved solutions. Any unauthorized or inadequate use of these trademarks may be subject to legal action.