LCP Radial Head Plates 2.4
The LCP Radial Head Plates 2.4 are indicated for extraarticular and intraarticular fractures of the proximal radius and multifragmented radial neck fractures. The Radial Head Plates have a limited contact low profile, a narrow width to stay in the safe zone, and are precontoured for better anatomical fit. They will be available in three lengths with 2, 3, or 4 LCP combination holes in the shaft for 2.4 mm locking head screws. Alternately, 2.4 mm and 2.7 mm cortex screws can be used. The proximal part of the plate with 5 round locking holes allows the setting of a maximum number of locking head screws. The position and the screw angle are anatomically adapted and enable the optimum setting of fractures. The shaft features one elongated sliding hole for optimal positioning of plate.
There will be two plates available in the set: LCP Radial Head Neck Plate 2.4 and a LCP Radial Head Rim Plate 2.4.
Both plates are 1.8 mm thick and tapered to 0.75 mm thickness. They are available in stainless steel and titanium. All plates are fully compatible with the LCP Distal Radius 2.4 set.
The Radial Head Neck Plate 2.4 sits more distal than the Rim Plate on the radial head. It fits both radius. All the proximal screws are angled toward the far cortex of the radial head and screws also diverge axially. This also provides a buttressing support to the articular surface.
The Radial Head Rim Plate 2.4 will be available in both left and right and has a 5 tilt to match the radial head. The plate offers divergent screw angles axially providing a buttress for the radial head.
Hazards and labeling
Due to varying countries’ legal and regulatory approval requirements, consult the appropriate local product labeling for approved intended use of the products described on this website. All devices on this website are approved by the AO Technical Commission. For logistical reasons, these devices may not be available in all countries worldwide at the date of publication.
This work was produced by AO Foundation, Switzerland. All rights reserved by AO Foundation. This publication, including all parts thereof, is legally protected by copyright.
Any use, exploitation or commercialization outside the narrow limits set forth by copyright legislation and the restrictions on use laid out below, without the publisher‘s consent, is illegal and liable to prosecution. This applies in particular to photostat reproduction, copying, scanning or duplication of any kind, translation, preparation of microfilms, electronic data processing, and storage such as making this publication available on Intranet or Internet.
Some of the products, names, instruments, treatments, logos, designs, etc referred to in this publication are also protected by patents, trademarks or by other intellectual property protection laws (eg, “AO” and the AO logo are subject to trademark applications/registrations) even though specific reference to this fact is not always made in the text. Therefore, the appearance of a name, instrument, etc without designation as proprietary is not to be construed as a representation by the publisher that it is in the public domain.
Restrictions on use: The rightful owner of an authorized copy of this work may use it for educational and research purposes only. Single images or illustrations may be copied for research or educational purposes only. The images or illustrations may not be altered in any way and need to carry the following statement of origin “Copyright by AO Foundation, Switzerland”.
Check www.aofoundation.org/disclaimer for more information.
If you have any comments or questions on the articles or the new devices, please do not hesitate to contact us.
"approved by AO Technical Commission" and "approved by AO Foundation"
The brands and labels "approved by AO Technical Commission" and "approved by AO Foundation", particularly "AO" and the AO logo, are AO Foundation's intellectual property and subject to trademark applications and registrations, respectively. The use of these brands and labels is regulated by licensing agreements between AO Foundation and the producers of innovation products obliged to use such labels to declare the products as AO Technical Commission or AO Foundation approved solutions. Any unauthorized or inadequate use of these trademarks may be subject to legal action.