3.5 mm LCP Periarticular Proximal Humerus
The 3.5 mm LCP periarticular proximal humerus plate is indicated for fractures, fracture dislocations, and nonunion of the proximal humerus particularly for patients with osteopenic bone. This construct acts as a fixed angle device with divergent and convergent screws offering superior biomechanical properties to improve fixation and pullout strength in osteoporotic bone.
The plate is positioned more distally (1215 mm from insertion of rotator cuff) to avoid impingement and more anteriorly distally to lessen the need to elevate the deltoid insertion. The plate is produced in precontoured models. Six suture holes with undercuts allow for passing sutures to help with both reduction and ligament reattachment. Chamfers at the top and bottom edges of the suture holes prevent sharp edges. The plate head features six locking holes that accept 3.5 mm locking screws and two locking kickstand screws in the plate neck to direct the screws into the calcar region. The plate shaft has elongated combination holes and accepts 3.5 mm locking and 3.5 mm cortex screws. The second calcar screw can be used for shaft reduction with a nonlocking cortex screw. The cutout in the plate for the cortex screw head is deeper and more rounded for reducing screw head prominence. The tapered plate tip facilitates percutaneous insertion. The plate is available in 26, 8, 10, 12, and 14 holes in stainless steel.
A 72-year-old woman suffered a four-part fracture of the left proximal humerus following a fall from a standing height. The patient underwent open reduction and internal fixation of the proximal humeral fracture.
Case provided by Dean G Lorich, New York, New York, USA
Hazards and labeling
Due to varying countries’ legal and regulatory approval requirements, consult the appropriate local product labeling for approved intended use of the products described on this website. All devices on this website are approved by the AO Technical Commission. For logistical reasons, these devices may not be available in all countries worldwide at the date of publication.
This work was produced by AO Foundation, Switzerland. All rights reserved by AO Foundation. This publication, including all parts thereof, is legally protected by copyright.
Any use, exploitation or commercialization outside the narrow limits set forth by copyright legislation and the restrictions on use laid out below, without the publisher‘s consent, is illegal and liable to prosecution. This applies in particular to photostat reproduction, copying, scanning or duplication of any kind, translation, preparation of microfilms, electronic data processing, and storage such as making this publication available on Intranet or Internet.
Some of the products, names, instruments, treatments, logos, designs, etc referred to in this publication are also protected by patents, trademarks or by other intellectual property protection laws (eg, “AO” and the AO logo are subject to trademark applications/registrations) even though specific reference to this fact is not always made in the text. Therefore, the appearance of a name, instrument, etc without designation as proprietary is not to be construed as a representation by the publisher that it is in the public domain.
Restrictions on use: The rightful owner of an authorized copy of this work may use it for educational and research purposes only. Single images or illustrations may be copied for research or educational purposes only. The images or illustrations may not be altered in any way and need to carry the following statement of origin “Copyright by AO Foundation, Switzerland”.
Check www.aofoundation.org/disclaimer for more information.
If you have any comments or questions on the articles or the new devices, please do not hesitate to contact us.
"approved by AO Technical Commission" and "approved by AO Foundation"
The brands and labels "approved by AO Technical Commission" and "approved by AO Foundation", particularly "AO" and the AO logo, are AO Foundation's intellectual property and subject to trademark applications and registrations, respectively. The use of these brands and labels is regulated by licensing agreements between AO Foundation and the producers of innovation products obliged to use such labels to declare the products as AO Technical Commission or AO Foundation approved solutions. Any unauthorized or inadequate use of these trademarks may be subject to legal action.