Headless Compression Screw extra small (HC S 1.5)
The headless compression screw (HCS) was first introduced in sizes of 2.4 mm and 3.0 mm. Now the family has been enlarged by an extra small version of 1.5 mm. Indications are fixation of intra- and extraarticular fractures and nonunions of small bones and small bone fragments, arthrodeses of small joints, osteochondral fractures, osteotomies, and avulsion fractures.
The HCS 1.5 works according to the same functional principle as for the existing 2.4 mm and 3.0 mm HCS: insertion, reduction and compression in separate steps. Controlled compression is achieved through a separate compression sleeve. The only difference is that the HCS 1.5 is not cannulated.
The shaft thread has a diameter of 1.5 mm and a head of 2.1 mm. The shaft thread length is progressive from 48 mm. The screw lengths advance from 826 mm in steps of 1 mm. A special compression sleeve is required for the HCS 1.5. An optional 1.8 mm drill bit for predrilling the head in hard bone is available.
Mechanical tests compared to the 1.5 mm cortex screw showed that the push-/pull-out performance is higher, torsion is about the same and maximum compression slightly higher for the same thread length when compared to the other HCS sizes.
A 22-year-old female with previous complex fractures of the base and head of the middle phalynx (proximal screws are from the previous fracture fixation) presented with a residual painful, deformed, and stiff DIP J. Joint arthrodesis planned.
Case provided by Robert Farnell, Leeds, UK
The arthrodesis was performed using the longest available screw. Note that despite this it has only just crossed the arthrodesis site (see Fg 2a-b)
Hazards and labeling
Due to varying countries’ legal and regulatory approval requirements, consult the appropriate local product labeling for approved intended use of the products described on this website. All devices on this website are approved by the AO Technical Commission. For logistical reasons, these devices may not be available in all countries worldwide at the date of publication.
This work was produced by AO Foundation, Switzerland. All rights reserved by AO Foundation. This publication, including all parts thereof, is legally protected by copyright.
Any use, exploitation or commercialization outside the narrow limits set forth by copyright legislation and the restrictions on use laid out below, without the publisher‘s consent, is illegal and liable to prosecution. This applies in particular to photostat reproduction, copying, scanning or duplication of any kind, translation, preparation of microfilms, electronic data processing, and storage such as making this publication available on Intranet or Internet.
Some of the products, names, instruments, treatments, logos, designs, etc referred to in this publication are also protected by patents, trademarks or by other intellectual property protection laws (eg, “AO” and the AO logo are subject to trademark applications/registrations) even though specific reference to this fact is not always made in the text. Therefore, the appearance of a name, instrument, etc without designation as proprietary is not to be construed as a representation by the publisher that it is in the public domain.
Restrictions on use: The rightful owner of an authorized copy of this work may use it for educational and research purposes only. Single images or illustrations may be copied for research or educational purposes only. The images or illustrations may not be altered in any way and need to carry the following statement of origin “Copyright by AO Foundation, Switzerland”.
Check www.aofoundation.org/disclaimer for more information.
If you have any comments or questions on the articles or the new devices, please do not hesitate to contact us.
"approved by AO Technical Commission" and "approved by AO Foundation"
The brands and labels "approved by AO Technical Commission" and "approved by AO Foundation", particularly "AO" and the AO logo, are AO Foundation's intellectual property and subject to trademark applications and registrations, respectively. The use of these brands and labels is regulated by licensing agreements between AO Foundation and the producers of innovation products obliged to use such labels to declare the products as AO Technical Commission or AO Foundation approved solutions. Any unauthorized or inadequate use of these trademarks may be subject to legal action.