Inter-lock Screwdriver T25/3.5 mm Hex
An essential part of fracture fixation today is ensuring soft tissue protection, driving surgeons to use MIO techniques and small, stab incisions for screw insertion with either plates or nail implants. However, several difficulties have been reported, such as missing screws, disengagement of the screw from the screwdriver, improper direction of screw insertion, and other problems.
For the current T25 and 3.5 mm hex screwdrivers, an external holding sleeve is available to retain the screw, but there are certain disadvantages with the external holding sleeve, such as the difficulty in the handling procedure and the need for a larger incision for the proper insertion of the instrument.
In order to address these clinical challenges, a new self-holding screwdriver has been designed to facilitate screw insertion, especially through small incisions at areas with large amounts of soft tissue, and will greatly help avoid the risk of disengagement of the screw.
The tips of the new Inter-lock Screwdrivers (T25/3.5 mm Hex) lock into the recesses of existing Synthes screws with a StarDrive 25 or 3.5 mm hexagonal recess (Fig 1). Wings were added to the nut for better grip when tightening the nut down while capturing the screw (Fig 2). After insertion of the screw, no force is required to release the screw from the tip of the screwdriver. The screwdrivers are available in two lengths: 330 mm and 224 mm.
This new screwdriver will improve the current screw insertion and removal procedures when compared to previously available screwdrivers, and will help to decrease the required OR time for these procedures.
Hazards and labeling
Due to varying countries’ legal and regulatory approval requirements, consult the appropriate local product labeling for approved intended use of the products described on this website. All devices on this website are approved by the AO Technical Commission. For logistical reasons, these devices may not be available in all countries worldwide at the date of publication.
This work was produced by AO Foundation, Switzerland. All rights reserved by AO Foundation. This publication, including all parts thereof, is legally protected by copyright.
Any use, exploitation or commercialization outside the narrow limits set forth by copyright legislation and the restrictions on use laid out below, without the publisher‘s consent, is illegal and liable to prosecution. This applies in particular to photostat reproduction, copying, scanning or duplication of any kind, translation, preparation of microfilms, electronic data processing, and storage such as making this publication available on Intranet or Internet.
Some of the products, names, instruments, treatments, logos, designs, etc referred to in this publication are also protected by patents, trademarks or by other intellectual property protection laws (eg, “AO” and the AO logo are subject to trademark applications/registrations) even though specific reference to this fact is not always made in the text. Therefore, the appearance of a name, instrument, etc without designation as proprietary is not to be construed as a representation by the publisher that it is in the public domain.
Restrictions on use: The rightful owner of an authorized copy of this work may use it for educational and research purposes only. Single images or illustrations may be copied for research or educational purposes only. The images or illustrations may not be altered in any way and need to carry the following statement of origin “Copyright by AO Foundation, Switzerland”.
Check www.aofoundation.org/disclaimer for more information.
If you have any comments or questions on the articles or the new devices, please do not hesitate to contact us.
"approved by AO Technical Commission" and "approved by AO Foundation"
The brands and labels "approved by AO Technical Commission" and "approved by AO Foundation", particularly "AO" and the AO logo, are AO Foundation's intellectual property and subject to trademark applications and registrations, respectively. The use of these brands and labels is regulated by licensing agreements between AO Foundation and the producers of innovation products obliged to use such labels to declare the products as AO Technical Commission or AO Foundation approved solutions. Any unauthorized or inadequate use of these trademarks may be subject to legal action.