22/10/2016
AO Technical Commission Approved

Rapidsorb Injectable Polymer System

The Rapidsorb injectable polymer system (IPS) was developed to offer a faster alternative to the fixation of resorbable plates with resorbable screws. The goal was to avoid the three steps drilling, tapping, and twist insertion required with resorbable screws, by using a novel delivery system that injects polymer into a predrilled hole (Fig 1). The new battery-operated system simplifies fixation to only two steps (drilling and filling).

The fastener cartridge allows seamless delivery of polymer into multiple holes. The risk of screw insertion failure through stripping or breaking is eliminated. Since fixation occurs through the delivery of the polymer in a semi-solid state, the need for multiple screw sizes is also eliminated. The starter kit includes the Rapidsorb IPS shell, the cap, and a fastener cartridge that produces approximately 15 fasteners. The material provided in the fastener cartridge is the familiar Rapidsorb 85:15 poly (L-lactideco-glycolide).

 

Indications

  • The Rapidsorb IPS is intended for use in nonloadbearing fracture repair and reconstructive procedures of the craniofacial skeleton (excluding the upper and lower jaw) in pediatric and adult populations (Fig 2). Rapidsorb IPS fasteners are designed to be used for the fixation of Rapidsorb plates, meshes, and sheets.
  • In addition, Rapidsorb IPS implants and instruments may be used with Rapidsorb meshes and sheets in nonloadbearing applications for maintaining the relative position of and/or containing bony fragments, bone grafts (autograft or allograft), or bone graft substitutes in craniofacial reconstruction (excluding the upper and lower jaw).

Hazards and labeling

Due to varying countries’ legal and regulatory approval requirements, consult the appropriate local product labeling for approved intended use of the products described on this website. All devices on this website are approved by the AO Technical Commission. For logistical reasons, these devices may not be available in all countries worldwide at the date of publication. 


Legal restrictions

This work was produced by AO Foundation, Switzerland. All rights reserved by AO Foundation. This publication, including all parts thereof, is legally protected by copyright.

Any use, exploitation or commercialization outside the narrow limits set forth by copyright legislation and the restrictions on use laid out below, without the publisher‘s consent, is illegal and liable to prosecution. This applies in particular to photostat reproduction, copying, scanning or duplication of any kind, translation, preparation of microfilms, electronic data processing, and storage such as making this publication available on Intranet or Internet.

Some of the products, names, instruments, treatments, logos, designs, etc referred to in this publication are also protected by patents, trademarks or by other intellectual property protection laws (eg, “AO” and the AO logo are subject to trademark applications/registrations) even though specific reference to this fact is not always made in the text. Therefore, the appearance of a name, instrument, etc without designation as proprietary is not to be construed as a representation by the publisher that it is in the public domain.

Restrictions on use: The rightful owner of an authorized copy of this work may use it for educational and research purposes only. Single images or illustrations may be copied for research or educational purposes only. The images or illustrations may not be altered in any way and need to carry the following statement of origin “Copyright by AO Foundation, Switzerland”.

Check www.aofoundation.org/disclaimer for more information.

 

If you have any comments or questions on the articles or the new devices, please do not hesitate to contact us


"approved by AO Technical Commission" and "approved by AO Foundation"

The brands and labels "approved by AO Technical Commission" and "approved by AO Foundation", particularly "AO" and the AO logo, are AO Foundation's intellectual property and subject to trademark applications and registrations, respectively. The use of these brands and labels is regulated by licensing agreements between AO Foundation and the producers of innovation products obliged to use such labels to declare the products as AO Technical Commission or AO Foundation approved solutions. Any unauthorized or inadequate use of these trademarks may be subject to legal action.

2020 IM covers

AO TC Innovations Magazine

Find all previous issues of the AO TC Innovations Magazine for download here.

Meet the Experts

Directly learn about AO Approved Solutions from the Experts themselves.

Innovation Awards

Innovation awards

Recognizing and fostering excellence in surgical innovation.

X
Cookies help us improve your website experience.
By using our website, you agree to our use of cookies.
Confirm